SunHorse ballast 120V
Product DescriptionFour red leads (36") and two yellow lead (36") plus black (120v), white (neutral) wires. Case ground. 120VAC/2.8A max draw. 19.25" x 3" x 1.25". Requires shunted (jumped) lamp holders.
The best ballast you can buy for powering 6 foot lamps. We have bench tested examples of this ballast, cycling them on and off over 10,000 times under load with no problems. We have also used them for years in premium equipment and found the performance to be exceptional. There are two different ways to use this ballast
1. 100w HO mode, powering four F71 lamps.
2. 200w VHO mode, powering two F71VHO lamps, using two red wires per bulb. Must be used only with lamps that have VHO cathode/anode sets or you will burn the lamps out in short order.
Can also be used to power F48T12VHO lamps but not F32T8. We've tested the F32 lamps, and it pushes 66 watts to them, which is 10% over tolerance and leads to premature failure. Staying within 1.5" diameter lamps (T12), you can pretty much power any 4 you want as long as the cathodes/anodes can handle it.
|Solacure Means Quality|
Solacure ultraviolet lamps aren't just good, we guarantee they are the best or we will give you your money back. Our patented glass is more transparent to UVA and UVB. Our custom cathode/anode sets lets you run 2 to 3 times more power than a standard lamp in the same size. All of our lamps have built in reflectors. We have a lamp for every need.
We stand behind everything we sell and guarantee each will perform exactly to specification, or we will replace them. We don't want your business this week, we want it every week, and we are willing to earn it. There really is a difference in quality when it comes to ultraviolet bulbs, and Solacure tops the list. Order online, over the phone, or call us if you need a custom UV lamp made, with fairly low minimums (around 2000 pieces). We can make it happen.
Buy with confidence: We like what we do, and we've been doing it for over 30 years.
Got a question? The best way is usually to email us at email@example.com.